TUTORIALS

Step by step to make a 2D door:

1- Create 3 layers: Walls, Doors & Hidden.

2- Make the layer "Walls" as current.

3- Draw a wall of 10 cm thickness with an opening 90 cm wide inside of it by using trim and extend.

4- Make the layer "Doors" as current.

5- Draw a door of 90 cm length length with 10 cm thick:

Draw horizontal Pline of 3 cm from upper right corner of the wall to the left then a line of 4 cm to the down, then 1 cm to the left then 6cm to down then 4 cm to the right then close the Pline. Draw the frame by starting from the middle bottom of the jamb. Make it 4x1cm then stretch to the half the left of 1cm. Use “Mirror” command to copy the 2 frames and the jamb to the other side. Draw the door by starting from the upper right corner. Draw a 4 cm line to the left and draw a vertical line. Copy it to the other side of the 4 cm.

6- Make the layer "Hidden" as current.

7- Change the linetype to dashed.

8- Draw an arc by using Arc (Center, Start, Angle (-90⁰)

MCTC Lebanon ©2014

Step by step to make a 2D window:

1- Create 3 layers:

Walls,  Windows & Projection.

2- Make the layer "Walls" as current.

3- Draw a wall for 20 cm thickness with an opening 300 cm inside of it by using trim and extend.

4- Make the layer "Windows" as current.

5- Draw a window of 300 cm length and 10 cm:

Draw a line from lower left to lower right corners of the wall. Offset this line 5 cm twice. Offset the left and right sides of the wall 5 cm twice for each side. Trim as the video.

6- Make the "Projection" layer as current.

7- Draw a line from upper left to upper right corners.

MCTC Lebanon ©2014